I’m not going to write an introduction on why commercial gyms aren’t the best equipped or the best atmosphere for powerlifting. It’s been beaten to death and we all know it’s true. So instead of trying to get you all worked up on another Sick of Your Gym rant, I’m going to tell you how we, The Confederate Barbell Club, did it.
The Confederate Barbell Club was located in Lexington, Kentucky. It began when Kevin Deweese, Jason Adams and I got together and started plotting how the hell we were going to train without the aid of the University of Kentucky. We were used to the plush equipment and temperature controlled atmosphere that the UK gave us. We traded this in for a small, sometimes unpleasant one car garage. I wouldn’t have done it any differently.
The Set Up
Jason rented a one car garage in his apartment complex and this soon became our home. This is what we outfitted the garage with in the beginning –
Eventually we added these pieces:
For those just starting their own place, you really only need the basics. I would start with the following pieces:
After you have this initial set up, I would look into the following pieces. Having talked to hundreds of people that have set up their own home gyms, these are the more popular items that they get to complete their weight room. Remember that some of these are going to be dependant on space or lack thereof.
If you have these things, you are well on your way to building your own gym. From there you can expand based on your needs and the space that you have.
So the big pieces in our weight room were the rack, the GHR, the Reverse Hyperextension, the bench rack and the lat pulldown. These 6 items took up the most floor space and everything was stacked around it. During the summer, to make more space, we would move the GHR outside. While this set up seems (and it was) very cramped, it was actually a good thing. Because we were in tight quarters, everyone was forced to be attentive to each other; coaching form, spotting and giving encouragement. There wasn’t an option to wander around and do nothing. Also, because there wasn’t a lot of space, whatever max effort lift was being done, everyone did it. It wasn’t like one person could do cambered bar good mornings and someone else would be doing box squats or some kind of pull. This also gave us a sense of camaraderie and teamwork. Even during our assistance lifts, there wasn’t much deviation from the pack.
So how did we set all this up and make it work? The first thing that Jason did was lay plywood down, covering the entire garage. He stacked 2 (two) ¾ in. pieces of plywood on top of each other. To this plywood, we bolted the power rack, the Reverse Hyperextension, and the Power Bench Rack. Inside the squat rack we stapled thin carpeting. This can be found at any Home Depot and is relatively cheap. We did this to give us traction for squatting and pulling. Carpeting is the best option for squatting as there is almost no chance of your feet slipping. But it must be thin so as not have too much cushion. I think that we had to replace the carpeting after 6 months of constant use. We also carpeted the area in front of the Power Bench Rack so our feet wouldn’t slip on the plywood. We also had an area in front of the squat rack with carpeting for doing pulls.
A word of warning: be sure you have a good layout in your gym BEFORE you bolt anything down. You might look into some feng shui for some tips on setting your weight room up.
Important points:
Handling the Weather
Living in Kentucky isn’t too bad in the summer or the winter, but it’s not like its Hawaii. For the summertime, you must open up the garage door and you must have a fan. Between sets, I recommend going outside for some extra air; it’s always cooler out there. You must have a lot of water and Gatorade. A few towels to wipe off the sweat from the bench aren’t a bad idea either.
As bad as the warm weather is, nothing can compare to the winter time. The first thing we did was insulate the garage door. This helped quite a bit. A space heater was also gold. It may take awhile to heat up, but its well worth it. Make sure you dress appropriately and actually do a warm-up.
Important points:
The Training
So how the hell did we train in here? The most people we could handle at one time were about 4. We’ve had more than that and it became a nightmare. Because we all did the basic 4 day WSB split, there wasn’t a lot of guessing on what we would do on each day.
At the time, none of us had families, so our scheduling worked out fairly well.
Bench Press
The biggest challenge that we had to face when training the bench press was not max effort or dynamic work; it was the assistance work afterward. Because we had limited space and equipment, our assistance work centered on a few key movements.
Shoulders
Standing Military Press: This was easy to set up and easy to move through quickly. This was probably the main movements for shoulders.
Incline Press: All we had was a flat dumbbell bench so we had to raise the end of the bench (using boxes and cinder blocks) to make an incline bench. This wasn’t that big of a deal once we learned the correct combination. Because of space, if someone wanted to do these you could not do military presses or dumbbell bench presses.
Dumbbell Bench Press/Incline Press: We did have Olympic dumbbell handles but when training in a group of 4 guys, this can be a huge pain in the ass to change the weights. If one of us were going to use the dumbbell handles, only one other guy usually trained with him. As a side note, when using Olympic dumbbell handles for bench pressing or incline pressing do NOT use spring collars. These will kill your legs when you set the dumbbells on them. I highly recommend using some kind of flat, simple collar that doesn’t stick out too far. Also, make sure that it’s very strong and tight. The last thing you want is the plates falling off and tearing your shoulder or smacking your head. This was not a big part of our shoulder training arsenal.
Triceps
We did some pin lockouts but stuck to doing 4 and 5 board presses with and without bands. We rarely did extensions. Not because we didn’t have dumbbells but because they didn’t work very well.
Lats
We did have a lat pulldown machine but it wasn’t the best and it was a little shaky. For the most part, we did a lot of dumbbell rows, bent over rows and pull ups for our lat work. We also didn’t have a chest supported row machine, which is my favorite lat movement. A couple of times we would incline the dumbbell bench and perform chest supported dumbbell rows on it. This is a great movement and I highly recommend it. Another great way to do pulldowns is to attach two bands to the top of the power rack, sit on the ground and tug away. Our rack was about 7 feet tall, so average bands worked well.
Upper Back
For upper back work, we stuck with band face pulls, rear laterals (holding plates, not dumbbells), seated DB cleans (we also held plates when doing these). This wasn’t too much of a challenge.
Important points:
The Squat/Deadlift
Dynamic Squat
The big day for us was Friday. This was the start of the weekend but only after we got done squatting. Because we had only one squat rack and four guys, we all would take a turn squatting. We never had a set order; we went when we felt good. But here is how we did this;
Max Effort Squat/Deadlift
Because of the tight quarters, everyone did the same max effort lift. We never mapped anything out, but the majority of our max effort work was:
These 5 lifts comprised the majority of our deadlift training. Again, we always had three spotters during the lift for safety and for coaching.
We also had a dry erase board in the gym that had all of our max effort lifts on it so we always had an accurate record.
Assistance lifts
Because we had a reverse hyperextension and a glute ham raise, this made up the majority of our assistance work. We also did a lot of sled work when there wasn’t a ton of ice on the street. There is really nothing that we couldn’t do, outside of machines such as a Power Squat or leg press, in regards to assistance work for the squat and deadlift.
We were very limited with space, so lunges were certainly not done unless they were done outside.
Important point:
How to Win Friends and Not Get Kicked Out
When we decided to start this gym our initial fear was that we were going to be kicked out because of the loud music and all the noise. So in order to combat this we simply weren’t assholes to people. We helped people move into their apartments numerous times. We also befriended the grounds crew and most of the neighbors that were in the general vicinity of the garage. We also made friends with the crazy guy next door who could weld or bolt anything. We developed good relations with just about everyone so when the music or the noise got too loud we were never “turned in”. Even the loud sled dragging never became an issue.
Important point:
So if you are looking to start up your own garage gym, here are the most important things you need to know:
Copyright© 2005 Elite Fitness Systems. All rights reserved. You may reproduce this article by including this copyright and, if reproducing it electronically, including a link to www.Elitefts.com.