My
Trip to Westside Barbell
Scott Mendelson
Note from Dave: Scott has
attended a couple of the Westside Seminars and has impressed me with his
nutritional and supplement knowledge. I was honored to receive this article from
him. You can read more of Scott's work at www.Infinityfitness.com.
His site also has a Q and A nutritional section as well as a new section devoted
to Coach John Davies. This site is a definite must see!
My weekend trips to Columbus Ohio usually include a
visit to the Westside Barbell club. This visit would be different than
those previous because I was actually going to train on Saturday and Sunday as a
bench and squat seminar attendee opposed to just watching the action.
I arrived at Westside to meet Dave Tate and one other trainee for a bench
workout. Watching the instructional tapes, reading articles and seeing
others perform the Westside techniques gave me a solid concept of what I wanted
to execute. In reality things did not fall into place as well as I had
hoped when training on my own. Dave watched as I knocked out my first
triple using my dynamic load plus a couple of chains. The chains
immediately made their presence felt by loading the top of the press, which is
usually the easiest part of the rep. According to Dave keeping the bar
over the wrists with the elbows properly tucked is the most difficult part of
the technique to master. We conquered this problem by pointing the knuckles of
my forefingers towards each other while trying to pull the bar apart. My
grip felt awkward with the new wrist position, but involvement of the triceps
improved dramatically. The elbows fell into place and I was able to stay
very tight by flexing the lats throughout the movement. It is difficult to
perfect technique without an expert set of eyes to help you identify glitches;
fortunately I was able to hear advice straight from the stud's mouth.
Dave conducted an elaborate Q and A for us focusing on the bench dynamic and
upper body max effort days. The key to the dynamic work is speed, but
finding the right load and knowing when to progress to a new weight can be a
challenge. Using one load for four sets followed by a five percent
increase in bar weight for the remaining sets is a good way to progress to a new
dynamic weight. Bands do change the scope of things by requiring less
focus on speed when used with the bench. The extra eccentric loading
created by the bands is the primary benefit. Those needing to perfect form
can boost practice opportunities by doing twelve sets of triples with a reduced
load. You should "work up" twice every four weeks following the
dynamic sets and use one week a month to hit some high rep bench work.
Dave suggests using half of the dynamic load for two sets of 20-30 reps. This is
best done in a competitive mode by trying to beat the combined number of reps
from both sets done by your partner.
According to Dave identifying the optimal grip width for competition is a matter
of selecting your best grip from training. At Westside three different
grip widths are used during a dynamic bench workout. Try to establish a
consistent routine by reusing grips for a period of time before rotating.
During competition wide grips favor lifters using bench shirts, while a closer
grip is best for a raw bencher. Raw lifters will benefit most from max
effort lifts such as cambered bar presses, board presses and illegal wide
presses because of the extra chest emphasis. Some heavy dumbbell pressing
on a bench or swiss ball during the supplemental portion of the max effort day
is also a great way to develop the extra chest strength needed for shirtless
pressers. The ability to customize portions of the Westside training
system in an effort to address weaknesses and special needs is one of the
programs greatest assets accordingly to Louie Simmons.
The Westside system has a simple checks and balances mechanism in place to
prevent overtraining. Many lifters make the mistake of doing too much
supplemental and assistance work on the Max Effort day. Using heavy loads
during prehabilitation workouts, which are simply intended to promote blood
flow, is also a mistake. As a result the speed of the barbell during
dynamic workouts suffer. One must lighten up on training volume and or
intensity of the assistance and supplemental phase of the workouts if they
notice decreased bar speed during dynamic sessions. Assistance and
supplemental work are also intended to create muscular balance. Muscular
balance is achieved by dedicating equal emphasis to planes of movement.
Horizontal pulling movements such as rows match with bench pressing, while
vertical pulling exercises must accompany shoulder pressing. Dave believes
this is extremely important for injury prevention.
It was an honor to be in a gym that has produced so many Powerlifting world
record holders on Sunday morning. The writing was literally on the wall of
the tiny gym, which barely contains it's huge patrons. A chalkboard
listing the records for the squat, dead lift, bench and total according to
weight class cannot be missed as one enters the world of Westside Barbell.
Six unsuspecting students, who would never know how much help a Westside seminar
would provide them until they rubbed the chalk on their own hands stood in awe
of their awesome surroundings. White Zombie echoed through the gym as a few
Westside members finished their workouts.
Dave Tate arrived right on time this Sunday morning, but he did not appear to be
a typical lecturer. His determined look and impressive form made it easy
to tell Dave practices what he preaches. We were broken into two groups
according to our working weights for the dynamic squat. Luckily I was put into
the second group, giving me the opportunity to learn from the mistakes of the
squatters taking center stage before me. None of the students had used the
special Powerlifting squat rack before, but we had seen it in use on the
Westside instructional tapes. Huge rubber bands were looped under the rack
legs and around the barbell for added tension. Bands have become a staple
of the Westside training routines, and you would quickly understand why if you
used them.
The height of the box was adjusted to one inch below parallel for each squatter
and a manually operated jack like device was used to raise the bar to the
appropriate starting level. The first group moved through the sets at a
fast pace while teacher Tate made corrections accordingly pointing out many
mistakes while complementing improvement. His ability to address and
simplify complex issues was of great benefit to the attendees. Each
lifter was amazed by how easily Dave was able to identify flaws that they were
unable to see on their own. Drastic improvement was visible from set to
set as technical changes were made. A training partner tandem looked each
other in the eye with approval, affirming that attending the seminar was a vital
move in their choice to be better powerlifters. Most of the squatters did
not maintain enough curve in the lower back, which interfered with their ability
to sit back on the box.
My turn quickly approached as the first group finished. It was time to go
to work and my level of mental arousal had been building as I watched others
train. My first set of doubles was rough at best and I could not wait to
get out from under the bar so I could implement the technique corrections, which
needed to be made. Unfortunately the rack operator responsible for
catching the bar with the hooks did not know how to engage the mechanism. I
stood in a static position with the bands pulling me down for several second
before Chris Street figured out what to do. Our training loads ventured
upward as the workout progressed. The new load was intimidating for me as
a first timer with a bum knee and back. A switch went off in my head when Dave
Tate turned towards me and said "you better be ready". I took my
position under the bar and went to war with gravity, knocking out my best set
pain free.
A wide array of exercises was executed following the dynamic work for
demonstration purposes. Dave made sure every person in attendance
understood how to properly execute glute/ham raises, reverse hypers and other
Westside favorites. Fire in the eyes of the Westside members make it
obvious that half ass efforts are not tolerated. My group approached the
supplemental phase of the workout with intensity.
The real fun began in the parking lot with sled dragging. Ropes were
attached to my ankles and I was told to walk like Frankenstein so I would
properly pull the plate-loaded sled behind. Time under tension mounted and
the lactic acid followed. A second exercise required me to bend over with
straight legs, grip the rope between my ankles and walk with short strides.
These sled exercises felt like hypertrophy training but the muscles were taxed
differently than I expected. My groin, hamstrings and glutes were fatigued
but not terribly sore. Westside members use the sleds to increase
strength, accelerate recovery and prevent injuries. The lack of eccentric
components takes soreness out of the equation while the concentric phase creates
elevated blood flow. Heightened blood flow is crucial for recovery and
injury prevention according to Dave Tate. Dave does a series of shoulder
exercises with the sled during his prehabilitation sessions the day before his
dynamic bench work to blast away soreness lingering from training earlier in the
week.
Prehabilitation workouts are an important tool for accelerating recovery and
preventing injuries. Tough workouts build up junk in the system, which
slow recovery rates. Maximal performance requires quick recovery.
Prehab workouts were created to increase blood flow while incorporating some
unique flexibility work. The shoulders are often the most highly taxed
from the Westside routine. Shoulder recovery is addressed through the use
of plate-loaded sleds. Light external rotations with the sled provide a
great way to increase blood flow without taxing the system because of the
absence of an eccentric portion of the exercise. Tricep pushdowns
utilizing a very low weight for 20-30 reps helps with tris, while a cable
crossover is great for stretching the pecs. Be sure to keep all work very
light during these workouts.
We took our seats, not in desks but on gym equipment. Our lecturer went to
work on the dry erase board detailing the components of the training system.
Questions were addressed with exercise demonstrations and group discussion.
Every attendee had the chance to inquire about his individual training
situation. Professor Tate summarized his recommendations for each lifter
in great detail.
Westside members usually decide on the max effort lift of the day when they
arrive at they gym. Trainees feeling overtrained may elect to lower the
intensity of the max effort work by hitting a heavy triple instead of a new 1 RM
record, but hitting a 1RM previously achieved is not recommended. On lower
body day the max effort work may be dumped all together for some heavy sled
pulling, which pushes up the dead lift while putting less stress on the system.
Louie Simmons has pulled 11 forty-five pound plates. Dave in particular
becomes more specific with his training when he approaches a meet. Certain
max effort lifts boost his dynamic bench work and as a result they receive
special attention. Maintaining training records can help anyone identify
what max effort lifts help their bench.
My mastering the squat seminar experience came to an end, but the information I
learned will last forever. Theoretically all of those in attendance should
make tremendous improvement since they are armed with information they can apply
to their training. Overhearing positive conversations in the parking lot
confirmed by theory. One salivating lifter remarked, "Actually
squatting in front of Dave gave him the opportunity to tell me exactly what I
need to do. No way to do that over the phone, I have been stuck on my
squat for a while, but after making the technique changes during the workout my
squat speed went through the roof". Facial expressions also
revealed the excitement built in the rejuvenated powerlifters who now had a new
potent bag of tricks.
Scott Mendelson
www.Infinityfitness.com