How it all started - Teenage Powerlifting

From 1982 - 1987

I  began training when with my dad signed me up at a neighborhood barbell club. I consider this to be the first "real" training I did after spending one stupid year jerking around with some weights in the garage. This was a Powerlifting gym and I was fortunate to have a group of serious lifters take me under their wing. This outlines how I trained during most of my teenage years.

The training was basic linear periodization, and although you'll see it was flawed as hell, I did make really good gains off of it. This phase laid the foundation for the lifter I'd eventually become.

Record Keeping

For a young kid just starting out, I sure was anal.

Back then I recorded everything – and I mean everything. My workout log book not only had my sets, reps, and poundages, but also how I felt that day, my last meal before training, even my Biorhythm. (I'm not sure what the point of that was except to let me know that I should look forward to having a shitty day.)

I took this approach because I wanted to understand everything about getting strong so I could eventually tweak it and make it better. What's interesting is that despite all my record keeping, things changed very little – except for my poundages.

Basic linear periodization is essentially limited block training (which has been around for years), but with less exotic names. So instead of nasty Eastern European sounding phases like "accumulation" and "intensification" we have the user-friendlier hypertrophy and strength.

Interestingly, those old school Eastern European names are making a comeback as of late, but no matter how many different ways you try to dress up this pig, it's still a limited form of block training.

Basic Linear Periodization

Phase: Hypertrophy (high volume - low intensity)

Duration (in weeks): 4-6
Intensity: 50-70% range
Reps: 8-20
Sets: 3-5
Rest: 2-4 minutes
Goals: conditioning, build muscle mass

Phase: Strength Phase

Duration (in weeks): 4-6
Intensity: 75-86% range
Reps: 4-6
Sets: 3-5
Rest: 2-4 minutes
Goals: strength

Phase: Power

Duration (in weeks): 3-4
Intensity: 86-93%
Reps: 3-5 reps
Sets: 3-5
Rest: 3-5 minutes
Goals: Power

Phase: Peak

Duration (in weeks): 2-4
Intensity: 93% plus
Reps: 1-3
Sets: 2-3
Rest: 4-7 minutes
Goals: PR's, meets

Phase: Transition (Active Rest)

Break after training
Duration (in weeks): approximately 4

A Simple System

Set up is simple; which is also the system's greatest drawback.

You'd basically find a meet and count backwards in time. The volume starts high and the intensity (as expressed as percentage of one-rep max) was low. Every phase, and every week, you upped the intensity and dropped the volume.

The trick to avoiding problems is to be as accurate as possible when choosing your 1RM. If you guess that your 1RM in the squat is 540 but it's really more like 500, you'll be okay for the first couple phases, but God help you when it comes time for triples.

For accessory movement, there aren't percentages listed, something that has messed up many overzealous novice lifters. I received good advice early on that saved me a lot of trouble, namely to train the accessories easy until they needed to be hard.

In other words, in the first phase I'd do stiff-leg deadlifts for 3 sets of 8 with a weight that I could've likely hit 3 sets of 20. Leaving reps on the table here early on is key to avoid overtraining down the road.

By the end of the hypertrophy phase I was usually as heavy [bodyweight] as I was going to be, and my weight would then start to drop with each successive phase. I attributed this to the fact that all the hypertrophy work was gradually phased out, and eventually even the accessories were eliminated. If you're a young guy who likes his guns and upper pecs, this sucks.

Intensity wise, you never come close to failure until around week seven as the goal through each phase is to never miss a lift. If it's week nine and you start missing lifts, you definitely are concerned. "Is my training program completely retarded?" becomes a reoccurring anxiety.

After the meet, the idea was not to train at all for a good four weeks to recover before starting up again with the hypertrophy phase.

Benefits of the System

Young Dave Tate

There are numerous benefits to training in this fashion:

•  Ease of setup.

As noted earlier, setting up a plan like this is a breeze, even for beginners. Once a proper 1RM is established, each week the intensity is raised and volume is lowered. Weights are rounded up to the nearest 5 or 10 pounds (no, no PlateMates)!

Gear is not introduced until well into the program, usually raw until the sets of 5. Then we add suits and go straps down; at 3's we go straps up.

I always preferred to go without gear for as long as possible; until I felt the percentages start to creep up on me.

•  Gives time to get used to the heavy weight.

The biggest mistake rookies make is going too heavy too soon. The long buildup to heavy weights helps keep the young guys reigned in.

•  The specific goal per phase is good for beginners.

The different blocks allow beginners to avoid distractions and key in on one strength quality at a time.

Beginners often have what's know as training ADHD, where they want to blast up their bench while adding an inch to their arms and improve their body composition. This style teaches them to have their eyes on just one prize at a time.

For example, during the hypertrophy phase the goal is gaining size. The weight on the bar is not important. During the strength phase on the other hand, poundage is key while hypertrophy is no longer a concern.

•  It's good for training in groups.

Because the goals are clearly defined, you can have athletes of differing strength levels train together and still make progress. It's very convenient for the overworked/underpaid college strength coach.

•  These cycles are as old as time.

Every powerlifter has done some program like this. If it didn't at least sort of work, no one would have passed it on to the next generation; unless the next generation was a bunch of retards who didn't deserve to be strong.

Here's a sample basic linear periodization program:

Pitfalls

There are many pitfalls to training in this fashion. Since this is familiar territory for many of you, I'll try to keep this brief:

•  Percentage based training is always skewed. Always.

Let's get one thing straight: a competition max is not the same as a training max. Fact is, a good competition max is often 10% higher than a training max. This is extremely important because if you base all your numbers off an inflated percentage, you'll be in for a world of hurt.

Sure, at first you'll be fine, when that 70% is really an 80%, but wait until that 80% you're supposed to do 3 sets of 5 with is really 88% and tell me how those sets feel.

The end result is that guys start taking sets off because it's too difficult. Three sets becomes two or even one "HIT" set, which only leads to more problems down the road.

•  Peaking can be tough

This system is geared towards peaking for one meet per cycle. Most guys would usually shoot for three main meets per year, with the odd bench or deadlift-only meet thrown in along the way just to stay sharp.

Thing is, what if you were like me and you compete a lot? If you schedule two meets one week after the other it can be done; basically, you set the first meet of the series at 98%, essentially turning that meet into another training session, and peak as normal for the second meet.

But what if your meets are staggered four weeks apart? What do you do then?

•  The breaks are long.

Some people just lose too much with the long active rest period. It never affected me that much, and I'd even schedule this active recovery period for when football training camp started up. Once the actual playing season started and practices became much less taxing, I'd start powerlifting training again.

Again, I was a young lifter and nowhere near my training or strength limits. An experienced lifter closer to the top of their game can't afford taking such a long period of non-lifting without risking losing much of the previous cycle's gains.

•  Abilities aren't maintained from cycle to cycle.

In my experience, much of the size built during Phase 1 would be a distant memory by the Peak Phase, and obviously, much of the single-rep performance attained in the Peak Phase would be gone by the time Hypertrophy started up again.

•  The accessory work isn't well planned out.

Looking back, I can tell we didn't have a clue what we were doing when it came to planning accessory work. Everyone just followed what everyone else was doing.

Look at the deadlift day, for instance: I think the accessory exercises were picked out of sheer laziness more than anything else.

You just finished doing deadlifts, "Hey, let's do stiff legs next. They help the deadlift, right, and we only have to strip some weight off the bar. Then we'll do bent over rows; shit, we don't even have to move!"

The fact that the accessories never changed throughout the cycle was another big problem.

•  Very little attention paid to technique.

The biggest thing I learned after moving to Westside was the importance of technique, hands down. The fact that basic linear periodization programs put so little emphasis on it is a big negative in my opinion.

For example, take any multiple-rep set of deadlifts. It's really only the first rep of a deadlift set that actually "works."

If you watch closely, the second rep is always better and faster than the first rep, 100% of the time. It has to do with the stretch reflex, and the fact that during the second rep the hips are set higher and closer to the bar.

If they do multiple reps with a traditional deadlifting bar, which bends, the weights closest to the end of the bar will touch the floor before the bar has even settled. If you look closely, many times the weights closest to the lifters are still 3-4 inches off the floor when the weights on the far end touch. It's like doing a bench press and touching your chest on the first rep and having someone slip in a one-board for the rest of the set.

If you're going to do deadlifting for reps, you need to use a stiff bar. If you're looking for a real challenge try using a squat or fat bar.

Anyway, that's not an indictment of linear periodization per se, but an example of the type of technique that is never mentioned in typical periodization circles. I can think of dozens of examples just like this.

Why I Moved Away From This System

Dave Tate 415 Pound Bench at 15 Years Old

I had a number of reasons why I moved away from this style of training, not the least of which being I had started college and was training at a gym that had zero powerlifters. So getting good training partners, even a good spot was a tall order, so I found myself looking to try something new.

Furthermore, I was young, in college, and wanted to be jacked. You'll see how well that worked out in the next installment.

How Would I Change This System?

A better question would be, How HAVE I changed it?

Despite the previously mentioned pitfalls, I've used this basic periodization model with some lifters, especially intermediates (gym rats with decent lifting experience, not raw newbies). I first take a good close look at the lifter before deciding on this route.

How's the lifter's technique? How strong are they? How well do they recover? What's their lifting schedule like? What about their work/school schedule?

All of these factors play a deciding role in whether this is the right road for them to go or not. Often, there are better – and faster – ways to reach their desired goal.

But if someone is hell bent on doing it, these are the modifications to make:

•  Use compensatory acceleration on all warm-up sets.

Since there is no dynamic work whatsoever, perform all warm-up sets (between 40% and their first work set) as explosive as possible. Actually, do all sets over 40% as explosively as you can.

I would go so far as to add in 2-3 additional explosive warm-up sets to get in even more dynamic work. Just take small jumps as you work up.

For example, let's say the program calls for 3 sets of 10 with 255. A traditional warm-up might be 135, 185, and 225.

In this case, I'd go with dynamic sets of 5 for 135, 165, 185, 205, 225, and then start work sets.

•  Select accessories based on weak points and cycle them.

Accessory work should still be meaningful and address the lifter's needs. I suggest sticking with the same accessories for three weeks before switching them up for something similar (i.e., stiff leg deadlift for Romanian deadlift). It's a good idea to try to hit a PR week three-rep maximum (not a 1RM). You should always be working on pushing your accessory work higher, either with heavier weight or more reps.

•  Keep the volume more consistent.

The program starts with way too high a workload and comes down to an insufficient volume to maintain the abilities previously derived from the earlier phases. A more consistent, manageable volume throughout would help avoid this. Don't misunderstand – the volume needs to change and is a large part of programming, but the drop from week one to the end of the cycle is not the most efficient way to go about developing strength.

•  Switch from a 12-week program to a 24-week program.

In between every week of the 12 week program should be a week of strictly dynamic work. This is a BIG change and something that will be covered in a future article BUT is one of the most critical changes I've seen to making this work.

So if week one calls for 315 for 5 in the squat, week two would be a dynamic workout, such as 8 sets of 3 with 40%.

•  Use special movements at the front of the cycle.

I suggest only using "real" squats in the very last phase of the cycle. Until then, use variations like band squats, box squats, reverse band squats, etc.

This slightly changes up the squat recruitment pattern, but also the different squat variations have different rep maxes, so by changing the lift you cycle the workload.

For example, let's say you can do 405 for 5 reps on back squats; you might be able to do 315 for 5 on the box. You're giving the same effort with each exercise, but exposing the body to vastly different workloads (315 x 5 = 1575 lbs, 405 x 5 = 2025 lbs). This is another huge – and very overlooked – lesson I learned from Louie Simmons.

You can combine weekly squat variations in your program with inserting dynamic work every other week:

Week 1) ME: Reverse Band Squat
Week 2) DE: Free Squat for Speed
Week 3) ME: Band Squat
Week 4) DE: Speed Squat off Box
Week 5) ME: Squat with Chains

Note: ME stands for "Maximum Effort," which means building to a 1RM or 3RM, while DE, which stands for "Dynamic Effort," implies speed work, i.e. 8 sets of 3 at 55%1RM with 60s rest between sets.

You get the idea.

•  For squats, percentages should be based off a perceived max, not an actual squat max.

You never need to work up to a true 1RM. A perceived maximum is sufficient, and working up to a 1RM just isn't necessary and is often more trouble than it's worth (see: working off a training max versus a competition maximum).

•  What you eat matters.

Guys starting out now have it easy. Today you have websites with real information, online stores to get the best gear, and supplements that actually work. When I look back at how I ate back then it depresses me. I feel like Marlon Brando in On the Waterfront: I coulda been a contender.

Conclusion

After taking a second look at this article, it does look like I'm dumping all over linear periodization when that really isn't my intention. Again, I made great gains off of this system and if it weren't effective, coaches would've abandoned it long before I ever showed up on the scene.

It's a good system – follow it with passion and determination and you'll do well. Make the modifications I suggested and it can be improved considerably.

I don't feel it's the best way to train, but it's not the worst either. Trust me on that one.