American Thin Press™ Angled Grip Bar

Feel the Difference. Lift with Focus, Trust, and Strength using the American Thin Press™ Angled Grip Bar. Eight shoulder-saving angled grips give you smooth presses and easy reverse-grip options—all in a lighter, more stable frame that fits modern 3×3 racks. Limited stock—get yours before they’re gone!

Key Features: 

- This is  3 inches Thinner than American Press Bars, adding more wrist stability and making them great for extensions, overhead presses, rows, curls, barbell front raises, and more. 

- We moved the weight stop out 2 inches better to accommodate the 3x3 rack posts and bench cups. 

- 8 Possible Grip Positions!  ( 7", 16.5", 24", 30" ) - Reverse the bar to flip the angle for reverse grips!  


* While we all love specialty bars, outside of the SS Yoke Bar ( a must-have), they are all "nice to have". THIS THIN PRESS™ is a MUST-HAVE BAR for anyone looking to add barbell movements to their training! 



Contact one of our strength equipment specialists HERE for bulk orders, custom colors, designs, pads, logos, etc.

In-stock bars (first 5) ship in 1–3 business days. Next batch ships within 7 days. Pre-orders ship in about 12–14 days.

On Sale $287.10 Regular Price $319.00
SKU
DSCDM-1001411

What Makes It Special

We slimmed our proven American Press Bar by 3 inches and pushed the sleeve stops 2 inches outward. The result is the American Thin Press™ line—built for lifters who want rock-solid bar control and natural angled grips that keep wrists and shoulders happy.

Why Choose the Angled Grip

  • Eight Pressing Options – Four widths (7", 16.5", 24", 30") plus forward or reverse angles double your setup choices.
  • Natural Wrist Alignment – The angled handles let your elbows and shoulders move pain-free under heavy loads.
  • Reverse-Grip Ready – Flip the bar for underhand presses without wrist strain.
  • More Range of Motion – Thinner bar lets you sink triceps extensions deeper and clear your face on overhead presses.
  • Plays Nice with Modern Racks – Wider rackable zone keeps plates away from 3×3 posts and bench cups.


Specifications

Overall Length83.5"
Overall Width5 ¾"
Grip Widths7", 16.5", 24", 30"
Grip Diameter1.5"
Grip Length5"
Bar Weight≈ 35 lb
Rackable Area42" – 55"
Sleeve Length13.5"
FinishTextured powder coat
Manufactured InUSA

Built to Last

Every weld, cut, and coat is done in the USA by the same fabricator who crafts our original American series. You can Trust this bar to stand up to the heaviest training cycles.

Limited First Run

We produced a small batch to gauge demand. When they’re gone, restock may take weeks—order now and keep your program rolling.

Contact one of our strength equipment specialists HERE for bulk orders, custom colors, designs, pads, logos, etc.


American Thin Press™ Bar Comparison

Model Grip Widths (in) Handle Style Extra Feature
Neutral Grip 7  |  16.5  |  24  |  30 (+ center) Straight Slim frame for steady presses, rows, and extensions
Angled Grip 7  |  16.5  |  24  |  30 Angled (forward / reverse) Flip bar for reverse-grip pressing; 8 total hand positions
Cambered Neutral 7  |  16.5  |  24  |  30 (+ center) Straight 2.5-in camber—flip for extended or shortened press path
Cambered Angled 7  |  16.5  |  24  |  30 Angled (forward / reverse) 2.5-in flip-able camber + 8 angled grips for maximum options

FAQ

Why isn’t there knurling on the handles?

These bars have a textured powder coat that gives a good grip. Adding knurling would significantly raise the price because we make the bars in small batches. If demand grows, we may add knurling later.

Do the sleeves spin?

No. Spinning sleeves would also raise costs and are unnecessary for the pressing and rowing moves this bar is made for. A solid sleeve keeps the bar strong and the price fair.

How do pre-orders work?

Your card is charged at checkout, saving your spot in line and allowing us to build your bar. You can cancel before the bar ships for a full refund.


American Thin Press™ vs. American Press™ Bars (elitefts Comparison)

American Thin Press™ Line American Press™ Line
Frame Thickness 3" thinner front-to-back for better wrist alignment and control Standard Swiss bar width
Sleeve Positioning Sleeves moved 2" outward for increased plate clearance Standard sleeve positioning
Rack Compatibility Optimized for modern 3x3 racks with better upright clearance May cause plate contact with uprights on some 3x3 racks
Bar Stability Under Load Feels more stable (closer to straight bar feel) Traditional Swiss bar feel; slight wobble possible at max loads
Grip Variations 4 models:
• Neutral
• Angled
• Cambered Neutral
• Cambered Angled
4 models:
• Neutral
• Angled
• Cambered Neutral
• Cambered Angled
Range of Motion (ROM) Slightly increased ROM due to thinner frame Standard ROM
Use Case Best for controlled pressing, shoulder comfort, rehab, accessories Best for heavy pressing, variety, and program versatility
Load Capacity Same as American Press Line – built for heavy use Same as Thin Line – built for heavy use
Construction Fully welded, powder-coated steel – Made in USA Fully welded, powder-coated steel – Made in USA


Write Your Own Review
You're reviewing:American Thin Press™ Angled Grip Bar
Your Rating